Innovation and upgrading Kaisi trinocular microscope has made a new technological upgrade, which solves the problem of losing the left eyepiece of traditional trinocular microscopes when using the camera, so that the field of view of the three eyes at the same frequency will not lose the left eyepiece. Allows you to better observe during soldering and electronic repair processes

Magnification 0.7x-5x zoom objective provides continuous zoom magnification and longer focal length, The Zoom microscope has a 7-50x magnification,Suitable for most specimens, adjust as needed

Large field of view WF10x23 eyepiece Kaisi stereo microscope has a pair of WF10x23 eyepiece, which has a wider field of view than the conventional WF10x20 eyepiece, with an adjustable eye distance design, allowing you to reduce eye and neck fatigue during work, which can help you Get a better experience

Microscope accessories The repaired microscope is equipped with Soldering exhaust fan and LED ring light. The smoke generated during work blocks the lens and affects the work. The Soldering exhaust fan can effectively suck the smoke, so as to work better. LED ring light illuminates specimens for clearer working specimens

New upgrade Work floor the trinocular electron repair microscope has a 14.9 "x 10" work floor with 7.4 "x 4.7" silicone soldering mat, so that you are not afraid of high temperature when using hot air guns and soldering irons. There are three additional small silicone parts trays, which facilitate the storage of small parts during work and prevent them from falling.

Reminder The working distance of the standard version is different from that of the Barlow lens. The installation position of the standard version is near the bottom, the 0.7 lens is in the middle and lower part, and the 0.5X lens is in the middle and upper part. Please set the working distance correctly so as to adjust the focus clearly.